The Session: Where I’m At

It’s been a while since the last Session. This is a special edition for The Event, kindly initiated by Alistair Reece. Remain Indoors.

I’ve been doing fine for the last 7 weeks. My company decided to implement a work-from-home policy (I’m privileged to work in IT as a software developer) on March 12, so it’s been pretty much exactly 7 weeks since this has started for me. In some ways, it was perfectly timed, as my wife had to undergo a knee operation around the same time, so it was actually good that I could work from home and be able to care for her as well.

The first time leaving the house has actually been stressful. One thing that I’m annoyed about are people who don’t care about keeping their distance or blocking a whole lot of space by needlessly hanging around outside in larger-than-legal groups. This didn’t just use to be annoyance, but rather anxiety. Mind you, this was at a time when I didn’t have a a home-made face mask (thanks, mum!). With a face mask on, I’m now feeling perfectly happy and content walking outside, even with people not keeping their distance. Even if they might not be effective, they sure do work for me at least on a psychological level.

As for beer, we were shopping wisely and bought two crates of beer from a local specialty beer shop before any lock-down measures were even announced. These two crates kept us going for quite a while. I did a quick count of how much other booze we had in the house, easily more than 40 bottles of all kinds of whisk(e)y, more than 10 types of gin, several rums, and even absinthe, vodka and fancy calvados. I put together a list in my mind of small beer businesses I wanted to still have around when this is all over, and supported them by either buying their beer, or buying vouchers from them if they offered such a thing.

My drinking has actually gone down. I don’t drink for the most of the week, and only a bit during the weekend. If I have 3 beers on one of these days, it’s already unusually much. Yesterday was such a day, as my Stammtisch has a Zoom session full of beer drinking and pub quizzing and discussing craft malts and their importance for historic beer styles, so I had three beers (Wicküler Pils, Neder Schwarze Anna, Schönramer Pils) and two small whiskeys (Koval Rye).

Stammtisch. I used to meet friends once a month for a few beers in one of the best German beer bars of Berlin, Foersters. We had a Stammtisch scheduled for March 12, but decided to move it to a Zoom call instead. We’ve kept this up, and actually met more often that we do normally, once every one to two weeks. It certainly helped me keep sane, and due to the decentralized nature of it, we’ve been able to include former regulars and friends that now live in other parts of Germany or the world.

Most of my beer writing energy has actually been going towards my upcoming book about Vienna Lager. I’m now in the final stages: I have only a few small gaps to fill, I have the printing layout set up, and a solid idea for a book cover, less beery per se but rather a nice homage to the city of Vienna itself. I’m so absolutely excited about the whole topic, as I found out so many things that have never been discussed in the context of the history of Vienna Lager, so many things that are just misrepresented and have even been forgotten. At the moment it seems quite realistic for me to publish the book in June or early July. It’s going to be kick-ass if I may say so myself.

That said, work itself has been hard-going at times. Not everything is great when you’re just sat at home for most of the time, trying to avoid distraction is hard, days just blend into each other, and you barely realize what day of the week it actually is. Weekends just pass super quickly and don’t really provide as much rest and recuperation as I would like them to do.

But in the grand scheme, I’m still doing fine.

The History of Modern Baking Yeast

Since the beginning of The Event (remain indoors!), people have been panic-buying flour. Lots of flour. More recently, some people on Twitter have also complained about how ordinary baking yeast is unavailable at the moment. For myself, that’s not an issue, as I have a healthy sourdough culture (named Penelope) that I now use more regularly to bake some delicious bread for both fun and sustenance. But others aren’t so lucky, so a question asked by many is whether brewers yeast is an acceptable substitute for baking yeast.

The short answer is: yes, they’re both Saccharomyces cerevisiae.

The slightly longer answer is: yes, just be aware that the pitching rates in baking are much higher than in brewing, so if you start using dry brewing yeast, your bakes will be very expensive. A good way to deal with this is to keep some of your yeast in the form of dough, like a sourdough, except not sour, and just regularly feed it with sugar or flour. That should make it possible to propagate the yeast for quite a while, making the last pack of bakers (or brewers) yeast last for quite a while longer.

The beer historian’s answer is: yes, they’re both Saccharomyces cerevisiae, and were a focal point of cooperation between the brewing and the baking trade. In the first half of the 19th century, it was common in Vienna for bakers to use top-cropped yeast from the local breweries. It was in fact their main source of yeast. Then something happened: in late 1840, Anton Dreher in Klein-Schwechat (just outside of Vienna) starting brewing using bottom-fermented yeast. His new types of beers became an instant hit in and around Vienna, and of course, other local breweries had to react and also introduced bottom fermentation to their breweries. This change went in fact so quick that within just five years, all the Viennese breweries had switched. The bakers weren’t happy, because that changed the yeast they could get from the brewers: while top-cropped yeast was previously plenty and of good quality, the new type of yeast was harvested from the bottom of the fermentation vessel, and was full of bitter hop compounds, hop resins and cold break (coagulated proteins), which tasted bitter and looked darker than previous yeast, making it unsuitable for baking.

The bakers first tried to import fresh yeast from outside Vienna, but this turned out to be infeasible as the yeast’s quality and health would deteriorate too quickly, so they needed to find another way to get a reliable yeast source, ideally making them independent from any brewers. So the Viennese bakers’ guild started a competition in 1845, announcing that they would award a prize to the person who could produce a leaven that was suitable for completely replacing the much sought-after top-fermenting brewers yeast.

The brewer Adolf Ignaz Mautner of St. Marx brewery went on and developed a system to industrially produce and press yeast. His general approach was fairly simple: first, a mash is produced and converted into sugar, then the mash is cooled and fermented. The resulting yeast can be harvested, washed and pressed.

For the mash, kilned barley malt and rye (in a ratio 1:2) are finely crushed and mashed in with hot water (3.5 l of water for every 1 kg of grist) to rest at 70°C for two hours. This should fully convert all starches into sugar, and also allow other contents of the malt to dissolve. This thin slurry is then chilled to about 28°C using a coolship, and then inoculated with a “mother yeast”, which is basically a smaller amount of the same type of mash that has previously been inoculated with pressed yeast or top-cropped brewers yeast and left to ferment until it is in its most active state. Essentially a yeast starter.

After about 10 to 12 hours, the fermentation is active enough to be covered with a thick foam, the yeast. This yeast is then skimmed and put onto a fine sieve that is slightly submerged in water. The idea here is to dissolve the yeast in the water, while other hard matter from the mash will be caught by the sieve. Using ice, the yeast can be made to fall out of suspension. This watered yeast is then mixed with high-dried wheat or potato starch flour, put into multi-layered linen bags, and then pressed. In terms of yield, 100 kg of crushed malt and rye produce about 8 to 10 kg of yeast, to which about 2 to 5 kg of starch flour are added.

This method is now known as “Vienna Process” and after a few improvements, it won Adolf Ignaz Mautner the Viennese bakers’ guild’s prize.

In later years, more improvements and new methods were introduced, such as a switch to green malt and corn (maize) for the mash, the introduction of single strain yeasts, as well as ways of promoting more yeast budding (and therefore a greater yield), such as aerating the mash or diluting it. These improvements increased the yield from 10% in the 1840’s up to 40% in the early 20th century. But essentially, pressed bakers yeast is still produced using methods that every brewer at the time understood, just used in a way to make yeast, not beer.

Adolf Ignaz Mautner was later made a knight of the Order of the Iron Crown, receiving the hereditary title “Ritter Mautner von Markhof”. While his brewing business was merged with the breweries of Klein-Schwechat and Simmering in the early 20th century to form a public limited company, the Mautner Markhof family remained in the food business. While family sold their business to German food company Develey, Mautner Markhof still exists as a brand in Austria, for products such as mustard (and other condiments), vinegar and pressed yeast.

And that’s how baking yeast has historically been the same as (top-fermenting) brewers yeast, and how its production was turned into an own industry by a brewer using beer brewing methods.

Book Review: “Beer: Taste the Evolution in 50 Styles”

Due to The Event, I’ve been working from home for over a week now, basically self-isolating voluntarily, and counterintuitively (but not unexpectedly), I haven’t really had a lot of spare time since then. I nevertheless want to use my free time better, support everyone out there with some fresh new content on my blog, and also get into a better rhythm to blog more. Also, remain indoors.

In December 2019, I got into a twitter conversation with Natalya Watson, discussing the minutiae of Vienna Lager history in the Americas, a conversation we then continued by email. Natalya recently published her new book, “Beer: Taste the Evolution in 50 Styles“, and she was so kind to send me a free copy as the book touched some of the topics that we had discussed.

The book’s concept is simply as it is intriguing: give a brief introduction into the history of beer based on the evolution of its four main ingredients (malt, water, hops, yeast) over time, and accompany each of these evolutionary steps with a beer that lets you experience that particular ingredient in its respective stage. Its target audience are people who are interested in beer but haven’t yet deep-dived into brewing or even the basic history of beer.

The book starts off with very brief introductions to each of beer’s four main ingredients and how they are made, grown or prepared, and what variety exists of them, followed by a short explanation of the brewing process itself. While really short, I found these introductions exactly on point, like an elevator pitch except that it tells you how grains are malted, why this is done, what types of malts exist, and how they’re used in brewing beer.

It then goes on to introduce each ingredient in greater detail: for malt, it explains the evolution from smoked malts to the invention and development of pale malts and roasted malts, to amber and pale lager beers and ales that started being brewed in the 19th century, finishing with all the different types of pale beers that have been invented in the 20th century. Each of these evolutionary steps of malt introduces you to a new beer that stands in as an example.

For the topic of water, Natalya shows by example how the composition of the local water used to heavily influence what the locally brewed used to be like.

The evolution is hops is explained by first looking at unhopped beer seasoned with other herbs and spices, then introducing landrace varieties resp. varieties of hops that were discovered and then propagated, followed by an introduction to European and American hop breeding and how it influenced beer in the 20th century, finished off with an excursion into how these recent developments in hop breeding have completely changed the beer styles of India Pale Ale.

To finish with the last ingredient, yeast, Natalya introduces the reader not just to different types of yeast, but to different approaches in fermentation, such as spontaneous fermentation and sour beers, and also talks about top-fermenting beers that have held on despite a gain in popularity of bottom-fermented lager beers within the last 150 years, as well as the influence of the science of microbiology on brewers yeast and innovations around them.

The book then finishes with an outlook into possible futures of brewing, how styles could change, and which other ingredients are available to brewers.

While I’m certainly not the intended target audience for this book, I nevertheless found it very informative. It explains some of the most important concepts of beer and brewing, and while some details were left out for brevity, all explanations seemed on point. The fun and easy to read language made the book rather captivating: I finished it in less than 2 days. The pages are colour-coded, so you always know what to expect next when turning the page, and a timeline on the top of the page guides you at what time period you currently are when reading.

As for the historical accuracy, a gripe that I have with a lot of beer books, I think Natalya did a good job in researching the general history of the beer styles that are discussed in the book. Of all the styles where I actually have first-hand knowledge, I couldn’t find any obvious mistakes. Except for one, and that was actually the start of our Twitter conversation, namely how Vienna Lager came to Mexico and persisted there. This is a pet peeve of mine, as much of the literature reiterates that supposedly Austrian brewers brought this beer style to Mexico in the 19th century. I will hopefully soon publish my book on Vienna Lager (The Event is preventing me a bit from doing research at VLB’s library), and Natalya told me she will start an errata page. Of course, do not be swayed by this detail, because the rest of the book is great.

If I knew someone who was interested in beer, and wanted to learn more about it and didn’t know where to start, then I would definitely recommend Natalya’s book to them and tell them to read the book, front to back, and then try and get the beers described in the book, and sample them while re-reading the individual sections. It certainly would get you acquainted with a large amount of different styles, and expose you to many classic beers that I think everyone should try. For the purpose of education, I think “Beer: Taste the Evolution in 50 Styles” is a great book to get started. For people who want to dive in even further, it even guides them to more beer literature.

Mahrs aU Clone, Iteration 1

As I’ve announced a month ago, my homebrewing project for 2020 is to develop a clone recipe for Mahrs aU. I brewed the first iteration on December 27, and here’s a quick report on how that went:

My grist was fairly simple, 2.4 kg Pilsner malt and 2.4 kg Munich I malt, both from Weyermann. I doughed in with 20 litres of water which I had treated with 6 ml of lactic acid (something something counteract local water’s hardness, I calculated this ages ago and stuck to it since, I’m terrible with water chemistry). I then conducted my preferred double decoction mash where I start with a very large thick decoction, rest it at around 70°C when heating up, then boil it and mix it back, and then pull a thin decoction, boil it, and mix it back again. The temperature steps the main mash was undergoing in this case were 39°C (dough-in temperature), 62°C and 72°C. I then moved the mash to the lauter tun, recirculated to get clear wort and then started lautering, measuring 17.6 Brix on the first runnings. I continuously sparge, and after 30 minutes, I had enough wort collected to bring it to a boil. Pre-boil gravity as determined by refractometer was 11 Brix.

After 90 minute boil, with hop additions (2019 harvest Perle, 7.2% alpha acid) at 90 minutes (32g) and 10 minutes (10g) before the end of the boil, I moved the wort the a fermenter and chilled it down to 10°C before adding two rehydrated sachets of W-34/70 yeast. Fermentation took off about 36 hours after pitching the yeast.

Things didn’t go quite as planned, as the wort’s OG turned out to be 13.3°P. My grist calculation was based on previous batches in which I employed the same mashing regime, but this time, for whatever reason, efficiency was quite a bit better than what I wanted to achieve. I’m not going to complain about it, as it’s only 0.6°P (roughly 0.002 in gravity points) higher than where I wanted to get to.

Fermentation was quite a bit slower than usual. I’m not sure why, but I may have rehydrated the dry yeast improperly, therefore slightly underpitching. Even after four weeks, fermentation did not seem quite finished. I would have waited, but two days ago, another problem came up: the seal on the fermenter’s tap was leaking. Not a whole lot, but in the tray underneath, a few hundred ml of beer had built up. Since this was just the first iteration, and things weren’t 100% right from the beginning, I decided for an emergency plan: instead of lagering properly, I just cold-crashed the beer, hoping not more would leak between Friday and today, and then bottled the beer today. With 4.4°P, I’m not 100% sure the beer had completely finished fermenting (though there wasn’t really much of a noticeable residual sweetness), but I bottled it anyway and just let it naturally carbonate over the next few weeks. To be frank, I’m not particularly happy with that, but given that things weren’t right from the beginning, it’s still an acceptable shortcut for a first iteration.

A quick taste test directly from the fermenter revealed that the beer indeed tasted remarkably close to the original Mahrs aU. While the beer was pretty clean-tasting, the hop bitterness still seemed a bit rough. My concern is that whenever this has aged a bit and smoothed out, the bitterness might not be quite high enough. Bear in mind that I based the hop additions and overall bitterness just on some very flimsy circumstantial evidence. Since then, I’ve received multiple pointers to other sources talking about the Mahrs aU parameters, such as this very helpful comment by DB who mentioned that Michael Jackson had written about aU in 1999, when it was still bittered with Northern Brewer and Hallertauer Tradition to 36 IBU, and this reply on Twitter pointing out that Ron Pattinson’s book Decoction! (seriously, you should buy it) contains OG, ABV, real extract, apparent attenuation, colour and bitterness from the year 2000 for “Mahr’s Bräu ungespundet – hefetrüb” (aka Mahrs aU), setting the bitterness at a whopping 42.5 EBU.

I’m still waiting for the bottled beer to condition and slightly mature before I’ll start a proper taste test the results of which will then be the basis for my next step. Based on the brew day itself, I will probably slightly reduce the amount of malt the next time so that I can get closer to 12.7°P in OG than the 13.3°P of the first iteration. Also depending on how the bitterness shines through, I may slightly increase the bittering hops.

I also chucked out that particular fermenter and ordered myself a 30 litre Speidel fermenter instead.

My Home-Brewing Project 2020: Cloning Mahrs aU

Possibly one of my and my wife’s favourite beers from Bamberg in Mahrs aU. It’s an ungespundetes (unbunged) pale-amber Kellerbier, meaning that it was carbonated without spunding, taking up only the amount of CO2 the liquid would do under the current temperature and atmospheric pressure, and is normally served unfiltered.

Brewing ungespundetes Bier is traditional for Bamberg, and has already been described as being particular to the city’s brewing practice in the 19th century (e.g. Das Bierbrauen in allen seinen Zweigen by Johann Muntz from 1840, p.121). It also shows in the name: “aU”, which some people call the shortest beer order in the world, is local colloquialism for “ein Ungespundetes”. The Mahr brewery in Bamberg, located in the city’s district “Wunderburg” and just opposite of Keesmann brewery, has been around since 1670, and has been owned by the Michel family since 1895. They are one of the traditional Bamberg breweries, and not just because of aU, they have a faithful followership locally and around the world.

A glass of aU, straight from the source.

If I want to brew a clone of Mahrs aU, I first need to find out about the beer’s specifications. Fortunately, I found a video from 2010 about the production of aU that contains some information: https://www.youtube.com/watch?v=Ubmm2j-2Uq4 (embedding is unfortunatey disabled, so you’ll have to click the link to view it)

From there, we can extract quite a bit of information about the beer. It’s a bottom-fermented beer, with an original gravity of 12.7°P. The grist consists of Pilsner malt and Munich malt of unknown ratios. The sole hop variety used is Hallertauer Perle with an unknown hopping schedule or bitterness. The final beer contains about 5.2% alcohol by volume and is carbonated with 4 grams per litre of CO2.

This is already quite a bit of information that we can work with and construct a recipe out of. Of course, I don’t expect the result to be perfect, so this is just a rough first outline. Further changes to this are up to the result of the first brew.

For the grist, I will start with simply 50% Pilsner malt and 50% Munich I malt. I couldn’t find anything useful about the mashing regime employed at Mahrs, so I’m simply sticking to my preferred double decoction scheme, hopefully ending up with a wort of the right OG.

For the hops, I’m sticking to just Perle. I managed to buy fresh 2019 harvest cone hops, which in my case have 7.2% alpha acid. I estimate the bitterness of aU to be roughly around 30 IBU. This is not just based on taste testing, but also on a rough bitterness scale that Mahrs provides on their website: the Helles has 3 hops, the aU has 4 hops, and the Pils has 6 hops. The following is a lot of conjecture, but bear with me: if the Helles has roughly 20 IBU and 3 hops, then 1 hop in their proprietary scale is equivalent to 6.66 IBU. If we assume the Pils to have around 40 IBU (it is rather bitter) and 6 hops, we get the same result: 1 hop is equivlaent to 6.66 IBU. In that respect, the scale seems fairly consistent. Based on this, a beer with 4 hops bitterness should be equivalent to about 27 IBU. Now I dare anyone to correctly blind-taste the difference between 27 and 30 IBU.

So for a first test brew, I decided to simply add to hop additions, one at the beginning of the boil (90 minutes) at 1.6 g/l, and a late addition just 10 minutes before the end of the boil at 0.6 g/l. This should add the desired bitterness of about 30 IBU, and leave behind some hop flavour and aroma, without being too hop-forward.

I will ferment this beer like any of my other bottom-fermented beers at 10°C, and then briefly lager it. In the beginning, I will simply use W-34/70 yeast. I do think though that Mahrs house yeast strain has quite the impact on the overall flavour of the beer. This is noticeable in direct comparisons of their aU and their Helles which I’ve conducted, and the Helles has some underlying subtle spiciness that is very present in the aU and can’t simply be explained through the malt (the Helles most likely contains no darker malts, unlike aU) or the hops (the Helles is hopped with Hallertauer Tradition and Mittelfrüh, whereas aU is all Perle). A future point in experimentation is to see whether there is any live yeast in bottles of aU which could be grown and used to ferment later batches, or whether other commercial strains show better results, in case straight-up W-34/70 doesn’t cut it.

This is my hypothesis how an aU clone could be constructed. Whether any of speculations hold true will show when the first test brew is ready to drink. My plan is to brew it with the next few days, which means it will be ready in about 6 to 8 weeks time. I’ll keep you updated here.

German Sparklers

Sparklers, little attachments to a beer engine’s nozzle that aerate the beer and produce a bigger head, are a bit of a controversy. Northerners stereotypically swear by them, Southerners despise them, etc. Personally, I think they make sense with some beers, but not so much with others. My personal hypothesis is that a lot of cask beers are brewed with the intention of being dispensed with or without a sparkler. A pint of Landlord without a thick head on top would certainly be weird, while London Pride served through a sparkler was probably one of the grossest pints I’ve ever had.

Most people think that this is probably a problem only cask beer aficionados in England face, but at least in the 19th century, lager beers in Germany and Austria directly dispensed from wooden casks were served in a similar way: besides the regular tap, a device called Mousseux-Pipe, sometimes also called Bierbrause (lit. “beer shower”), was also quite common. I’ve never seen an actual photo or illustration of one, but the descriptions of it make it sound very much like a sparkler: when beer was dispensed from a cask through the Mousseux-Pipe, it foamed up and produced a bigger, denser head.

As with every aspect of beer, the effect of this dispensing method also came under scrutiny by beer researchers. Th. Lange compared how much carbon dioxide was lost when dispensing from a regular (wooden) tap compared to dispensing from a Mousseux-Pipe, both with bunged and unbunged beer.

The total loss of CO2 when pouring bunged beer was 14.6% from a regular tap, and 22.72% from the sparkler tap. For unbunged beer, which is lower in CO2 in the first place, the loss was slightly lower: 10.27% from a regular tap, and 14.03% from a sparkler tap. (Source)

What’s also interesting is the amount of CO2 lager beers were served in the late 19th century: a regularly carbonated (bunged) beer contained 3.9 g/L (= 1.99 volumes) of CO2, a medium-bunged beer 3.457 g/L (= 1.76 volumes), while an unbunged beer contained as little as 3.097 g/L (= 1.58 volumes) of carbon dioxide. Compared to the typical carbonation of modern beer, this is fairly low: modern lager beers are often carbonated at around 5 g/L or roughly 2.5 volumes, while cask ales are carbonated lower at roughly 2.9 to 4 g/L (1.5 to 2 volumes).

So when we’re looking at the historic carbonation rates, it clearly shows that they are more in the range of what we get in modern cask ale. These historic lager beers seemed to have been more gently carbonated, making for a nicer drinking experience, something that you would find also in beers gravity-poured from wooden casks in Franconia.

Just like its modern counterpart in England, the use of Mousseux-Pipen was not uncontroversial either: in Tyrol, the use of syringes of similar devices to create artificial foam in beer was prohibited from 1854 on for sanitary reasons. A letter to the editor in a newspaper from 1871 laments the “strict non-enforcement of this edict got rid of syringes” and popularized beer showers that produced a thick and dense foam that helped defraud customers through underpouring.

Some publicans also saw sparkler taps as an issue: the wooden casks of the era were not entirely tight, so they gradually lost carbonation. Combined with a sparkler tap and the agitation when transporting, handling and tapping the casks, this led to an unacceptable amount of carbonation loss resulting in flat beer.

The organization of Viennese brewery owners even blamed assertions of beer adulterations on poor beer pouring practices: beers that tasted overly bitter were accused of using something other than hops for bitterness. Practically, beer that was poured hard and through devices like sparkler taps ended up flat, and no CO2 to soften down the hop bitterness. The Viennese brewers therefore suggested to pour beer as little as possible, and with as little devices in between. Instead of getting beer poured through a sparkler tap into a jug or large bottle, and then carried all the way home, beer should ideally be poured directly into a glass through a regular tap, and protected from sun and heat while bringing it home.

All in all, Mousseux-Pipen seemed as controversial back in the day as sparklers are in England nowadays. While I couldn’t find anything definite, I’d say the practice at the very latest died out when gravity-pouring beer from cask fell out of fashion, and more modern top-pressure-based dispensing methods became popular. And frankly, in the narrow context of gravity-poured lager beers, I don’t really see the need for it, as I’ve never seen such a beer freshly poured from a cask suffering from any foam issues, while still having a gentle carbonation that makes it easy to drink. Maybe brewers have become more knowledgeable about brewing beer with greater foam stability, or the slightly higher carbonation of modern lager beer is making a difference, or maybe the higher quality of modern “wooden” casks (most of which are metal-lined nowadays) means less CO2 leakage and a better retention in carbonation. In any case, a properly poured beer directly from a cask, with a nice thick head on top, makes for a great presentation, and I crave one now.

About Saazer Genossenschaftsbrauerei

As some of you may have noticed on my Twitter account, I am currently researching for a book about historic and contemporary Vienna Lager. As with my previous book, I want to lay out the history of the style as detailed as possible, and accompany it with historic recipes and authentic brewing instructions. On top of that, I want to describe how “modern” Vienna lager came to be as part of the craft beer revolution, and what the current state of the beer style is.

Why am I doing this? Because I think that, compared to the popularity of the style, very little is known is about the beer’s history, and in addition, a lot of misinformation and myths have been spread which I try to clear up and reset the narrative.

As part of my historic research, I stumbled upon several references of “Anton Dreher’s Export-Brauerei” in Saaz/Žatec, a city best known for the local hop variety grown in and around it. I found this strange, because historic sources talk about only four brewery locations that were bought and run by Anton Dreher father and son: the main brewery in Klein-Schwechat just outside of Vienna, a brewery in Steinbruch/Kőbánya near Pest (nowadays Budapest), a brewery and hop garden in Michelob/Měcholupy just outside Saaz/Žatec, and a brewery in Trieste, but none of them mention a fifth brewry directly in Saaz. So of course I had to find out more about this brewery.

The first traces of the brewery can be found in newspaper articles mentioning its foundation on either 23 or 25 May, 1898, under the name “Saazer Genossenschaftsbrauerei”, literally “Saaz cooperative brewery”, allegedly by a syndicate that had managed to raise 3 million Crowns, the equivalent of over 42 million Euros nowadays.

The building works took several years, and only in January 1902 the brewery was able to announce that they would start operations in spring of the same year. Already later that year, ads can be found of their beer named “Urstoff” (lit. “original stuff”).

The other brewery from Saaz/Žatec, Bürgerliches Brauhaus (burgher brewhouse) Saaz, was not happy about it, went to court, and obtained judgement prohibiting Genossenschaftsbrauerei from using the name “Urstoff” altogether, and instead earning the right to the “Saazer Urstoff” brand exclusively for Bürgerliches Brauhaus. The court decided that the name “Urstoff” was consumer deception, probably because it insinuated that it was the “original” beer from Saaz, especially since Bürgerliches Brauhaus had been around since 1801, while Genossenschaftsbrauerei had been founded very recently at that time.

In 1903, Genossenschaftsbrauerei went one step further and made the “Urstoff” part of the company name: “Saazer Genossenschaftsbrauerei” was renamed to “Urstoff-Genossenschaftsbrauerei in Saaz”. Bürgerliches Brauhaus complained about this as well, and saw this as an attempt to circumvent the court’s verdict, which was again confirmed by court.

When looking not at trademark court cases but at beer production volume, Genossenschaftsbrauerei was doing quite well for such a young brewery: in 1903/1904, the brewery produced 85000 hectolitres. This was relatively miniscule compared to the amounts other Austrian breweries around that time period were brewing (Klein-Schwechat 1896/97: 770536 hl, Bürgerliches Brauhaus Pilsen 1904: 808000 hl).

In 1905, the legal troubles came to an end, when it was finally decided by the Austrian trade ministry that the “Urstoff” brand registered by Genossenschaftsbrauerei had to be deleted.

In 1914 then, the brewery was converted from a cooperative to a limited liability company (GmbH) named “Exportbrauerei GmbH in Saaz”, with a nominal capital of 1,029,000 Crown, about 5.7 million Euros in today’s money.

During World War I, the Austrian government apparently regulated beer exports, and Exportbrauerei was a complainant about this: the regulation apparently based on OG of the beers, and assumed an average of 11% which – according to Exportbrauerei – severely disadvantaged breweries only brewing 12% beers but no 10% beers, and suggested to instead determine an actual average OG per brewery. It is not known what came of this, but it does tell us one thing about the food economy in Austria-Hungary during the World War: at least in 1916, enough grains must have still been available to brew full-strength beers.

After the breakup of the Austrian-Hungarian Empire, Exportbrauerei was located in newly founded Czechoslovakia, and of course operated like before. It was not exactly a big player in the export business, though: Bürgerliches Brauhaus Pilsen, by then also known as “Pilsner Urquell”, was responsible for 209000 hl beer export in 1929. The total beer exports of all of Czechoslavakia in the same year were 271000 hl, but Exportbrauerei Saaz was responsible for only 5000 hl of those.

One blog claims that Exportbrauerei was renamed to “Anton Dreher’s Exportbrauerei” in 1926, but interestingly, I haven’t really been able to find any other sources about it. In any case this is an interesting year, because at that time, the Dreher family was not really involved with the Austrian brewing business anymore: Anton Dreher Jr. had died in 1921, his son Anton Eugen Dreher died at the age of 54 in 1925, his son Theodor had died in 1914 in a car accident, and his son Eugen had moved to Budapest and sold off his stocks. The inheritance went to Anton Eugen’s daughter Katharina “Kitty” Wünschek-Dreher.

Exportbrauerei Saaz nowadays (photo by SchiDD, licensed under CC BY-SA 4.0)

I have not been able to find out who had the idea to give Exportbrauerei Anton Dreher’s name, and more importantly, why, as there is no discernible direct connection between Anton Dreher, who made Klein-Schwechater brewery big and pale lager beer famous around the world, and this medium-sized Bohemian brewery. This is also the reason why I decided to tell the story of “Anton Dreher’s Exportbrauerei” in my blog instead of my upcoming book, as it does not touch the history of Vienna Lager itself.

How to Brew my Award-Winning Berliner Weisse

I recently brewed a Berliner Weisse, submitted it to SLOSH SOUR 2019, a homebrewing competition dedicated to Berliner Weisse, and I won! So here I’m documenting how I brewed and what’s the rationale behind it.

Since the homebrewing competition was about brewing straight Berliner Weisse, with no twists and no innovations, I decided to simply follow how Berliner Weisse used to be brewed according to historic brewing literature.

Grist

Naturally, I wanted to use large amounts of pale wheat malt. Historically, the wheat malt used in Berliner Weisse was high in protein and quite undermodified. Malt like that is practically impossible to get, so instead, I chose to use a large amount of chit malt. To bulk the grist up a bit more, I also added some floor-malted Bohemian Pilsner malt. The final grist looked like this:

  • 2 kg pale wheat malt (Weyermann)
  • 1 kg chit malt (BEST)
  • 0.5 kg floor-malted Bohemian Pilsner malt (Weyermann)

Hops

Berliner Weisse is classically mash-hopped, so I simply added 6 g of Tettnanger hops (3.4% alpha acid) to the mash.

Mashing

I mashed in all the malt with 10 liters of hot water. To stay authentic, I used untreated Berlin tap water. I slightly underestimated the required temperature, so the resulting mash temperature was 46°C. I then heated it up to 53°C and did a protein rest of 40 minutes.

I then heated up the mash up to 62°C, and did a brief saccharification rest of 15 minutes, then further heated it up to 72°C to rest and convert for 45 minutes. After these 45 minutes, the mash was completely converted.

Now this is obviously a weird mash schedule, but in fact I based it on the mash schedule documented by the former Groterjan brewmaster A. Dörfel. At Groterjan, an initial protein rest was done at about 53-54°C, then the mash was slowly heated up to 75°C. I did a brief 62°C rest because I assumed that on my homebrew kit, heating up would be much quicker than on Groterjan’s big kit. I also kept the temperature a bit lower to prevent any issues from potentially overshooting the target temperature. I also left out one step that Groterjan did: they boiled parts of the mash as a final step and slowly mixed it back, trying to keep the temperature at a maximum of 76°C. This just did not make sense for me to do on my homebrew kit.

After conversion was finished, I moved the mash to my lauter tun, briefly did a lauter rest, and then started lautering and sparging. I collected about 20 liters of wort, which I then brought up to 80°C to pasteurize it for 10 minutes. I then chilled the wort down to 20°C and pitched all my microorganisms.

Yeast and Bacteria

I pitched half a sachet (5g) of S-04 dry yeast, a pack of White Labs WLP672 Lactobacillus brevis and a pack of White Labs WLP650 Brettanomyces bruxellensis at the same time, and let it ferment together.

If you want to recreate this and are worried about infections: my protocol is to simply have a separate fermenter for anything involving Brett and Lacto fermentation, that hasn’t caused me any issues in the past.

Primary fermentation quickly started and was finished after about 3 days. The souring process took a bit longer, but after about 3 weeks, the young beer had attained a good acidity. Around the same time, a secondary fermentation, presumably from the Brettanomyces kicked off, which was done after about a week. I then let the beer sit in the fermenter for another few weeks, and then bottled it. As priming sugar I used common sugar, and went for a carbonation level of 6 g/L. Then I put all the bottles in a quiet corner and let it mature.

The OG of the beer was 8.8°P (1.035), slightly higher than the 8°P I had actually planned. At bottling time, the FG was measured to be 0.8°P (1.003). The calculated amount of alcohol is therefore 4.2% ABV. A bit higher than what I wanted to go for, but still low enough to make the beer low and refreshing.

At the time of the competition, the beer was about 2.5 months old, so still fairly young. According to one taster who described himself as hypersensitive to sulphur, it still had some hints of sulphur left. The overall flavour and aroma was quite pleasant though: tart, citrusy, but not overly sour, so that the beer was still balanced and refreshing.

I still have a few bottles left, so my plan is to keep some of them and age them for longer. This should definitely help the Brettanomyces develop more complex and interesting flavours. I also kept the yeast from the bottom of the fermenter, and I plan to repitch it in future batches. I’m actually thinking about brewing another Berliner Weisse soon, just to have something to age and maybe hand in for next year’s SLOSH SOUR competition.

Thanks to everyone involved, in particular THE MASH PIT who organized the homebrewing competition, and Berliner Weisse Kultur e.V. who made it possible for me to present my home-brewed beer to a wider audience at Berliner Weisse Gipfel.

Berliner Weisse Summit 2019

Berlin is one of those places that have a rich brewing history, not just because of literally hundreds of breweries that used to brew beer all around the city, but also because it’s home to one of the few old German beer styles that have survived to this day.

While the style was neglected in the second half of the 20th century, and had a hard time to keep its place in Berlin’s beer landscape, the recent surge in interest through the craft beer movement has helped repopularize it. When a few years there were only a few breweries like Brewbaker and Bogk Bier that restarted brewing the style the traditional way, this has changed: with local breweries like BRLO, Vagabund, and Berliner Berg, the landscape of locally brewed Berliner Weisse has expanded dramatically.

The rise in popularity also shows in the beer festival landscape: 6 years ago, Sylvia Kopp initiated the Berliner Weisse Gipfel (Berliner Weisse Summit in English), a beer festival centered about Berliner Weisse, but it’s also open for other “wild and sour” beers. On June 1, the fifth edition of this beer festival (now organized by Berliner Weisse Kultur e.V.) took place, and the number of breweries visiting and exhibiting their beers has been even greater than in the years before. And not just from Berlin, but breweries from all the over Germany as well as the Netherlands and even the US took part.

There were too many beers to try, but some of my highlights were:

  • Berliner Berg Schiller Weisse, very refreshing and easy drinking, exactly how it should be as a summer beer. Cristal Peck, Berliner Berg’s brewmaster, is incredibly enthusiastic about the style, and seems to be doing plenty of experimentation to get the beer just perfect.
  • Schneeeule Marlene. Less sour than some might expect, but with plenty of funk. A great beer to age.
  • Nevel from the Netherlands brought two golden sour ales, one called Alm seasoned with “forgotten herbs” which they forage themselves, and another one called Minne which was seasoned with Japanese flowering quince. Very complex, very balanced, quite refreshing even at 5+% ABV.
  • Oedipus, also from the Netherlands, brought a few of their sour beer creations, which so far have always been great, and this year was no exception.
  • Felix from Orca Brau brought an unboiled Berliner Weisse of 14 months age as well as Bretted Brokantie, a bretted version of his farmhouse ale. Both beers were good on their own, but what stood out was that Felix also offered pouring blends, and it worked: a shot of his Berliner Weisse added to Bretted Brokantie really brightened it up.
  • August Schell from New Ulm, Minnesota was there with a few versions of their Berliner Weisse. I tried Ulmer Weisse, their version of American Weissbeer, an obscure American version of Berliner Weissbier that is mentioned in the 1901 book American Handy-Book of the Brewing, Malting and Auxilliary Trades. It worked beautifully, and I’m so glad that they revived this historic beer style and also brew traditional Berliner Weisse in a historically pretty authentic way. Jace Marti, August Schell’s assistant brewmaster, also did a presentation on how they brew Berliner Weisse, and he recently also recorded a podcast about the same topic.
  • Joe Stange brought bag-in-box Den Herberg Oude Lambiek, which was a real treat.

There were so many more breweries, but I couldn’t try them all.

Besides just visiting the beer festival, I also had the privilege of serving my own Berliner Weisse. This year, THE MASH PIT together with Berliner Weisse Kultur organized a homebrewing competiton just for Berliner Weisse, SLOSH SOUR. Since I wanted to get more into Weisse brewing, this was a great chance for me to take part. Unfortunately, it was a bit of a short notice period, so apparently one four or so people registered, and my beer was the only one that was actually submitted. The jury sampled the beer, and found it to be good, so I won the competition and could serve the beer to festival visitors. It was well received, and someone even took the time to add the beer on untappd!

All in all, I’m very happy this beer festival exists, and it’s become my favourite one in Berlin. This has been by far the most communicative, enthusiastic, exciting, and totally nerdy beer festival here in Berlin, and I’m especially glad about it because it’s one important part of the effort to keep this historic beer style alive.

My Beer At Slosh 2019

On May 4, Berlin’s homebrewing competition SLOSH happened at BRLO brewery. I took part with a beer myself. I didn’t win anything, but it was nevertheless a good event to serve samples of your own beer, drink beer, and talk homebrew.

In total, 37 or so homebrewers took part, serving 40-something different beers. The competition mode is different what you may know from other competititons: brewers were divided up into 8 different tables of 4 to 5 brewers each, labelled A to H. Every brewer and visitor could vote on the beers of another table, selecting their three favourites, giving them 3, 2, and 1 points respectively. Obviously, brewers were assigned different tables to vote on than their own.

At the end of round one, the points were added up, and the most popular beer of each table was selected for round two. In this second round, professional judges tasted the beers and selected an overall winner.

Of course, this mode makes it relatively hard to choose the “right” beer style to win over other homebrewers as well as visitors, as crowd pleasers would more likely be voted favourite than just technically well-executed beers. My table was a relatively strong one: besides my own beer, a Golden Ale inspired by our last year’s visit of New Zealand, there was a citrusy Pilsner (quite classic, but with a late addition of Pacifica hops), a Saison hopped with (IIRC) Galaxy hops, and a NEIPA. From what I’ve heard, the votes were relatively close, and in the end, the NEIPA won.

As for my NZ Golden Ale, it suffered from my “competition curse”. So far, not a single beer that I submitted to a competition worked out as intended: 4 years ago, a Czech pale lager (essentially a PU clone) got oxidized rather badly when bottling and therefore scored rather poorly. 3 years ago, two beers that I submitted (a Saison and an ESB) got mixed up, and the ESB also caught an infection when bottling. The Franconian-style Kellerbier (inspired by Mahrs aU) didn’t work out because the dry lager yeast I used stalled twice, once at lager temperature, and once at room temperature, and so the beer never finished and was dumped. And this year’s beer, that’s a story on its own…

When we brewed our NZ Golden Ale, everything went fine until we went to boil the wort. That’s when we found out that the immersion heater that we use to boil the wort had broken. I normally boil in an electric cooker, but the cooker’s own heating element is a bit too weak to bring 25+ liters of wort to a full boil. I nevertheless tried that, but even after 3 hours or so, I still couldn’t bring it higher than 90°C. So I had to improvise, and split up the wort between two electric cookers (the second one normally functions as a kettle to boil decoctions, and later on as hot liquor tank).

With pouring the wort back and forth, I think I unnecessarily oxidized the wort, making it darker that what I had planned for. Also, the boil-off rate was quite different, so instead of ending up with a 11°P wort, I instead got a 13.5°P wort.

I was also worried about possible underpitching, so I pitched two sachets of Nottingham Ale dry yeast. Unexpectedly, this caused a very rapid and intense fermentation which finished only 72 hours after pitching. The resulting beer had a slight taste of fusel alcohol, confirming my suspicion that the beer may have heated up too much during fermentation at room temperature. In total, I wasn’t super happy about the result, but nevertheless served it at yesterday’s competition.

The overall feedback was surprisingly positive, and fortunately for me, serving the beer cold masked the unpleasant fusel alcohol notes.

Here’s the recipe:

  • 4.5kg Pale Ale malt (it was kindly provided for free by competition sponsor Weyermann)
  • 20g East Kent Goldings (5% alpha acid) – 60 minutes boil
  • 40g Nelson Sauvin (10.8% alpha acid) – whirlpool
  • 20g Waimea (15.5% alpha acid) – whirlpool
  • 2 sachets of Nottinghame Ale dry yeast, rehydrated

Unlike most of my other brews, the mash was simple: just 60 minutes of mash at 67°C, then lautering, and then boiling for what was planned to be 60 minutes (see above). I used East Kent Goldings hops for bittering. After the end of the boil, I waited until the wort was down to 94°C to reduce the amount of additional bittering contributed by the whirlpool hopping, and then added the whirlpool hops for 20 minutes. I then transferred the wort to the fermenter, chilled it down to 20°C, pitched the yeast, and let it do its thing.

The outcome were 18 liters of Golden Ale with an OG of 13.5°P, and 5.7% ABV (stronger than your typical Golden Ale). The colour of the beer goes very much towards orange rather than gold, and probably due to the large amount of whirlpool hops, it also looks rather hazy and never dropped bright.